Brushless Drive Card
Brushless DC Motor Control Unit
Starter Kit BDC D1 controller, is designed for brushless DC motors with hall-feedback.
Overview
The device requires external 24V DC.
Through the microcontroller can be set speed adjustment, direction change and braking.
BDC D1 system includes several control modes: internal or external proportional control (10K Ohm linear potentiometer) or external input, 0-10V or PWM, selectable, with which can be set the speed of rotation by an external device.
Control input can be select through some jumpers.
Can enable/disable 'soft-start' function and chose the ramp time.
The controller can be installed using screws or a standard rail mounting base.
The controller is protected against reversed input voltage polarity and fuse protected against over current.
BDC D1 Connection
Power supply (J1/J2): 24 VDC
Motor Connection (J6): Six pole screw connector
Drive by Potentiometer:
Soft Start (TR2):
External PLC Control (J7):
Specifications
- Single phase output
- Direction change
- Brake System
- Hall-transducer
- Adjustable speed limit
- Direct or frequency driving
- High efficiency
- Inbuilt resettable fuse
- Rail mounting base available
- Supply voltage: 24V DC
- Idle current: 10mA approx
- Current limit: 500mA
- Control voltage: 0-10V
- Control potentiometer: 0-10K
- Dimensions: 67x98x15mm
- Weight: 50g approx
- JP1 - Internal External
- Trimmer TR1 - Internal Linear Potentiometer
- J3 - External Linear Potentiometer (10K Ohm)
- CCW Disable
- CW Linear 1-30 Sec
- JP2 On - Enable PLC Control
- JP2 Off - Disable PLC Control
- JP3 0-10 Volt / PWM
Drawings & data
Need help choosing?
Tell us about your application.